It was around three months ago when I visited my friend that works at the steel waste. He made an amazing found. He found multible items that were in a very rough condition. They almost had some kind of concrete on them and a lot of heavy rust. This little screwdriver got my attention right away. It was not clearly visible what the function of it was, but I remember that I thought it might be some kind of ratchet mechanism. At home I posted a few pics of it in my Instagram story. It didnt took long for @hand tool rescue to reply, as he has the same screwdriver, just a slightly modern version of it, but similar mechanism. After some research I found some more pics and videos online. The brand is „Weltrekord“ made in Germany and its called „Hebelschraubenzieher“ which meas „lever scredriver“. The model I found was the first ever designed one from 1891. Weltrekord later made some small changes on the design. Newer ones have a small collet to clamp the insert bits and even newer ones came with plastic handles instead of wood.
At first I thought this will be a quick straight forward restoration project. It turned out to be a very tricky one. The most difficult part was definitely the disassembly, it took me three full days to get it in pieces. Heavy rust has done so much damage to all of the parts. Unfortunately the handle cracked when I removed it. I tried to restore it, but it became a huge mess and I decided to make a new one to have a nice and clean look. Theres a 40 minutes version of this video on my Patreon page where I show how I tried to repair the handle. I had to weld up material on a lot of parts and machined and sanded it clean afterwards. That all worked perfectly fine. Some parts have still very slight pitting but overall it turned out very well. For the finish on the steel parts I decided to try nickel plating for the first time and it worked fantastic. I went with a brushed finish and with the nickel coat the parts turned out amazing. I really like the look of the nickel plated parts with the wooden handle.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Adel AlSaffar
Gregory
Alex McGeorge
Courtney Maleport
David Barker
Greg Marston
Mellissa Marcus
Muzaffer Aksoy
Paul Mampilly
Vickie Bligh
Vince Valenti
Xavier Carbel
Yale Baker
Alex Breton
alex latzko
Alex Shipley
Aljoscha Erlebach
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brian Newton
Carlo
Chad Bryant
Chris Simondet
Cristian Zorrilla
Dre Gilley
Grok Senften
Harper Kim
Hunter R.
Jeremy Cole
Jessica Alexander
Jonas Richartz
Jordan Page
Joshua Bentley
Jozette Soto
justin f.
Kelly Imgrund
LVE
Marc Cerisier
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Paul Ambry
PerryK
Scott Marshall
Stuart Mitchell
Suiros
The Carlsons
Trevor Kam
Warren G Strand Jr
웅록 윤

Time and costs of this restoration:

$5 wood for the handle
$3 spring steel wire
$10 vinegar for nickel solution
I was working on this project for 2 weeks

My camera:
Panasonic HC-V180

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

„I make a new one“ T-Shirts:
teespring.com/stores/my-mechanics

My Main Channel:
www.youtube.com/c/mymechanics

My Second Channel:
www.youtube.com/channel/UC4EQCwfH54ieNPswtXh5K0w

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

My Facebook Page:
www.facebook.com/My-mechanics-1966277857002099/

I had this idea since I recently discovered how to easily make balls on the milling machine and lathe. As I currently dont know what to restore next, I decided to make the 8 ball. It was a very cool little project. Very accurate work was needed to get all six individual pieces fit together with no gaps. The hardest part of this project was filming the last few shots, because it is so super shiny now and reflects everything. I really like how it turned out and it will be a nice decoration piece to look at.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Adel AlSaffar
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Courtney Maleport
David Barker
Diecast Pirate
Greg Marston
Lambda GPU Workstations
Matt Bosch
Mellissa Marcus
Muzaffer Aksoy
Paul Mampilly
Vickie Bligh
Vince Valenti
Xavier Carbel
Yale Baker
Yuri Zapuchlak
Alex Breton
alex latzko
Alex Shipley
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brian Newton
Carlo
Chad Bryant
Chris Simondet
Easy Green
Grok Senften
Harper Kim
Hunter R.
Jeremy Cole
Jessica Alexander
Jonas Richartz
Jordan Page
Jozette Soto
justin f.
Kelly Imgrund
LVE
Marc Cerisier
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mickey Eisenhorn
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Paul Ambry
PerryK
Scott Marshall
Stuart Mitchell
Suiros
The Carlsons
Todd Medbury
Trevor Kam
Warren G Strand Jr
XL S
웅록 윤

Time and costs of this project:

$25 material
I was working on this project for 4 days

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

„I make a new one“ T-Shirts:
teespring.com/stores/my-mechanics

My Main Channel:
www.youtube.com/c/mymechanics

My Second Channel:
www.youtube.com/channel/UC4EQCwfH54ieNPswtXh5K0w

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

My Facebook Page:
www.facebook.com/My-mechanics-1966277857002099/

Last time I scrolled through eBays antique section, this nice little antique kitchen scale caught my attention at the first sight. It was a little bit expensive with a price tag of $75, but I didnt even thought twice about buying it. I fell in love with it right away.
The paint looked very bad, it also had some dents and some signs of its age. It was still working and had a new screw added, I guess someone quickly fixed it before selling. The plate did sit way too loose on the top part, that made me suspicious that it isnt the original one. After disassemling I thought this will be a very quick and easy restoration, but one thing came after the other and it tourned out to be the most challenging one ive done on this channel so far.
I wanted to have a super glossy and perfect paint job. For that reason I applied three coats of high build primer after the regular primer and filler. Wet sanding with 400 and 800 grit made the base super smooth and perfectly even. Then it was time to apply two coats of light ivory. After it dried I masked it again and painted the brillant blue. The paint turned out absolutely amazing.
The old glass cover was too messed up to even try to clean it. I milled a new one on the tiny cnc-milling machine. Instead of painting the back of it gold, I decided to mill a brass foil to put it underneath. I cut some threads into the housing and fixed the class with fake rivets in a brushed look.
The whole mechanism of the scale needed much attention. I had to remake some parts that got destroyed during the disassembly. But the most difficult parts were definitely the aluminium part and the paper scale. This was my first attempt ever in metal spinning. After a few tries I knew how to do it and I was able to make an absolutely perfect part. The scale was warped due to the disassembly with water, so I had to make a new one from scratch. It required a lot of math to calculate all the diameters and angles, but it turned out very well.
I spent a long time thinking about the plate. After my success with the metal spinning of the aluminium part I decided to try to make a new one out of a copper sheet. I made a negative form as a template out of wood and than spinn the copper sheet on it to a plate. After a failed tries, I suceed. The key point was to heat the sheet up before hand to make it soft. I then sanded it all clean and soldered a ring on the back.
The plate, The scale with the aluminium part and the glass cover with the brass foil were definitely my personal highlights of this restoration. I think this is definitely one of the most favourite project Ive done so far. It was very challenging and I had to learn many new skills to get the job done. After all Im very happy with this restoration.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Yale Baker
Adel AlSaffar
afreeflyingsoul
Courtney Maleport
David Barker
Derek Russ
Gregory
Justin Power
Mellissa Marcus
Muzaffer Aksoy
Paul Mampilly
Vince Valenti
Alan Hanson
alex latzko
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andreswara Hermawan
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Chad Bryant
Cristian Zorilla
Damian Rickard
Dan Williams
Dre Gilley
Harper Kim
Hunter R.
JD Smith
Jessica Alexander
Jonas Richartz
Jozette Soto
justin f.
Kelly Imgrund
LVE
Marc Cerisier
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Paul Ambry
Risky Deem
Robert Everich
Scott Marshall
Stuart Mitchell
Suiros
The Carlsons
Trevor Kam
웅록 윤

Time and costs of this restoration:

I was working on this project for 4 weeks
$25 kitchen scale
$20 2k primer
$30 high build primer
$30 2k coat light ivory
$30 2k coat brillant blue
$25 brass foil
$5 transparent plastic
$10 copper sheet
$5 aluminium sheet

My camera:
Panasonic HC-V180

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

„I make a new one“ T-Shirts:
teespring.com/stores/my-mechanics

My Main Channel:
www.youtube.com/c/mymechanics

My Second Channel:
www.youtube.com/channel/UC4EQCwfH54ieNPswtXh5K0w

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

My Facebook Page:
www.facebook.com/My-mechanics-1966277857002099/

Выбирайте и покупайте телевизор с Яндекс.ТВ под управлением Алисы: clck.ru/SVRA6

Сегодня у нас многоминутный сказ о том как Даня Крастер бронзу отливал, да не поддавалась бронза никак. Даня Крастер её и так, и эдак, а бронза всё никак. Смог-ли герой победить и отлить коварный металл или нет? Блин, на самом деле видос весьма экспериментальный. Раз литьё, то решили что будет вот так — карт бланш с факапами, экспериментами и рассуждениями. Приятного вам просмотра!

Даня Крастер Instagram — www.instagram.com/danyakraster

Build Not Bombs – это уникальный DIY-контент из России, где его создатель Даня Крастер совмещает познавательный контент с крутым шоу. Тут и эксперименты, и diy-гайды, реставрации и разрушения, физика и химия, интересные факты, обзоры на инструменты и мастер-классы от опытныхх ремесленников. Основной целью видео является популяризация культуры DIY, прививание людей к ручному труду и самообучение. Сделай сам или умри!

Даня Крастер делает весь DIY: is.gd/jRsiok

Для дома и его обустройства: is.gd/7uB7SZ

Эксперименты: is.gd/Dsan1V

Про алкоголь: is.gd/YL9XDW

Штуки, которые стреляют: is.gd/yQdO2n

Инструменты: is.gd/PBgPrJ

Самодельные музыкальные инструменты: is.gd/mrQ9AV

Транспорт: is.gd/BWfpxD

#данякрастер #каксделать #своимируками #diy #сделайсам #россия #интересное #топ10 #эксперимент #лайфхаки #buildnotbombs #самоделки #история #интересные #факты

Подписываемся на канал. С нами интересно.
Очередная прогулка по обмелевшей речке.
Ответы на частые вопросы
Я в контакте vk.com/gonchar452
Мой второй канал www.youtube.com/channel/UCgq394dLhg-PdS7Ao4tlGMg
Instagram www.instagram.com/gagarin_archeology/
Если вы хотите поддержать проект — сделать это вы можете тут you.support/da121b26
Мы официальный поисковый отряд. Занимаемся поиском и захоронением бойцов РККА, пропавших без вести в годы ВОВ.
Бойцов мы находим, если получается узнаем их имена, ищем родственников и хороним на родной земле со всеми почестями.
Все железо похожее на оружие и боеприпасы остается в лесу, дабы не иметь проблем с законом.В редких случаях некоторые образцы деактивируются прямо в лесу для последующей передачи в музеи.
Мы не занимаемся продажей находок. Нас это не интересует.
Немецких солдат если находим, то передаем останки или их местонахождение в организацию, которая занимается поиском немецких солдат в России.
Это не наша работа.Это наше Хобби. Мы занимаемся этим ради интереса и душевного удовлетворения, дабы внести свой вклад в историю не на словах, а делом
Зарплату нам не платят. Часть затрат окупают ролики на Ютюбе и помощь наших друзей подписчиков.
Чтобы делать каждый ролик интересным мы упорно работаем на сьемках и стараемся подавать картинку в самом лучшем качестве, выбирая интересные ракурсы для сьёмки. Для этого мы используем много техники – видеокамеры Sony FDR-AX100E, Sony HDR-PJ650E, Sony FDR-X3000R, и даже экшн-камеры GoPro HERO 3, Kodak Pixpro SP360.
У нас большая команда и для копа мы используем сразу несколько металлоискателей разных производителей, а именно АКА Сигнум и Беркут, Garret AT Pro и Pro pointer, Tesoro Tejon и даже популярный Golden Mask Deep Hunter Pro 2.

В каждом выпуске на канале gagarin мы стараемся рассказать о многих интересных темах как как металлопоиск, коп, золото, клад, блиндаж. Ведь история, археология и находка монет, сами копатели или английское excavation тесно связаны между собой. В поиске кладов мы, кладоискатели, чаще всего ведём раскопки второй мировой войны и в поиске клада иногда сталкиваемся с результатами работы черных копателей, чей промысел – коп по войне, коп по старине, ВОВ. Мы – белые копатели, а точнее кладоискатели, и даже в 2018 году коп и великая отечественная война для нас это как world of tanks для вас, наших зрителей.

Thank you for watching, I hope you will have a good time here :)

PATREON www.patreon.com/ladb
FACEBOOK www.facebook.com/LADBrestoration
INSTAGRAM www.instagram.com/ladb_restoration/

Email: contact.ladb@gmail.com

Thanks :-)

An antique wooden sled from the 1940s got my father when he was little. The sledge lay in the ground all the time. I came across them during the reconstruction of the land. The perfect project for a new video.

The rohačka sleigh, once an integral part of the inventory of every proper mountain cottage in the Giant Mountains or in their foothills before the invasion of motor vehicles, is today a historical curiosity of lively interest for both the local population, weekend cottages and guests of mountain resorts. Their forgotten last specimens are discovered with joy in the various «stalks» of the barns, where they escaped the orderly and liquidating attention of previous generations. The sent glory of wild rooster rides to us is heard not only from written records taken in the last century, but sometimes also occasionally from the mouths of witness narrators. After all, even after the Second World War, wood was approached in some parts of the mountains by them. It is generally said that this versatile and simple means of transport was already known and used by Gendorfs lumberjacks, which Mr. Kryštof brought from the Alps and settled in the Giant Mountains in the 16th century. Rohačky were used mainly in winter, but they often came to honor even in summer on steep slopes during haymaking.

The first written descent on a sledge took place in 1737 during the return from the expedition to the Little State. The report of the first purely tourist exit has been preserved from 1815. It was on a 7 km long route, leading from the border hut on the Przełęcz Okraj saddle (Grenzbaude) to the Pod Złotą Gwiazdą inn in Kowary. This attraction was constantly gaining new fans. In 1896, about 3,000 stag beetles and the same number of draft horses were prepared for tourists. An association of carriages was even formed, defending their interests and regulating fares on individual routes. Additional infrastructure has been developed, new border crossings and customs have been set up. Tourism became a mass affair, which was undoubtedly influenced by the commissioning of railway lines connecting the Giant Mountains with Berlin and Wrocław in 1866. Winter sleigh rides, similar to the summer ascent to Sněžka, were among the most popular tourist attractions in the Giant Mountains. Fares, depending on the length of the route, ranged from 5 to 16 marks and followed a fixed price list.

Josef Tylš, a forester from Červený vrch, came up with the idea of ​​resuming rides on old timber sleighs from Malá Úpa to Kowar, which were run here at the beginning of the 19th century to amuse the manor and increase the money of the highlanders. Under his leadership, in 1999, the editorial office became the organizer of the zero — trial congress from customs to Kowar. And the descents to Kowary are held regularly, the beginning is not in Pomezní Boudy, but about 3 km lower in the direction of Kowary. The goal is then in Jelenia Góra.

In January 2016, the first rohaček race was held directly in Malá Úpa.
(source: malaupa.cz/blog/2016/01/15/rohacky/)

If you have any information, you can share it with others on my Facebook page:

www.facebook.com/groups/951735661652138/

If you have any questions about the process, use machines or other things, ask me in the comments. I try to answer everyone and as soon as possible.

Im sorry for my bad English, its not my language.

Im uploading videos about restoring mechanical things. Im uploading videos about the restoration of old wooden things. I fix things as best I can. I am self-taught. Therefore, if some procedures are wrong, forgive me. Thank you.

If you like this renewal, share and send :)

Thanks for the advice on how to improve this channel!

youtube channel www.youtube.com/user/veradona1

To support our YouTube channel:
My Patreon Page: www.patreon.com/VeradonaRestoration
My PayPal: veradona@email.cz
Thank you Veronika and Radek

Veronikas new channel about cooking and baking: www.youtube.com/channel/UCfEr2fPoAF0GVBuxUmSu2Iw/videos

В этом видео я восстанавливаю пневматическую винтовку гамо, которую они собирались выбросить, я экспериментирую с двумя техниками воронения, холодным и горячим воронением, в конце концов мне повезло, и я получил б / у ложу практически бесплатно, надеюсь, вы развлекай и нравится!
Я оставляю вам ссылку, где можно купить жидкость, которую я использую для холодной очистки, я не знаю, какова будет сделка в этом магазине, потому что я не покупаю ее там, но там я видел ее дешевле:
www.armeriaeljabali.es/armeros-mantenimiento-y-limíritu/140-liquido-pavonador-ballistol.html

This time I´m restoring an old military watch from the WW2-Era.
It´s a Sanford with an AS 1123 movement.

The watch is in a really bad condition. The chrome-plating of the case is heavy damaged, the glass is scratched the movement is full of dirt and stops repeatedly.

I need to grind off the old chrome. After sanding and polishing the case, it´s ready for a new chrome-plating. But i need to add a layer of nickel before. The glass will be polished and the movement cleaned. Unfortunately the old radium-compound on the hands fell off so i need to re-lume the hands with super-luminova. I will add some coffee to it to make it more «vintage-looking».

After everything is cleaned, polished and re-plated, I can re-assemble the movement with some fresh oil. After that, this watch is in a good beat ( 6 seconds per day) again.

I hope you liked this restoration, if so, like, comment and subscribe ;)

Subscribe to my channel:
www.youtube.com/c/RedDeadRestoration?sub_confirmation=1

Music:
«Our Volunteers Waltz» by United States Marine Band
«Et Voila» by Chris Haugen

___________________________________

Follow me on Instagram:
www.instagram.com/reddeadrestoration

Facebook:
www.facebook.com/RedDeadRestoration

Patreon:
www.patreon.com/Reddeadrestoration

___________________________________

Acrylic Glass Polishing Compound: amzn.to/2XIP8vF **
Case Polishing Diamond Paste: amzn.to/2Ye1MSo **
Case Polishing Wadding: amzn.to/2UlNfme **
Thermo-Tape: amzn.to/30YktME **
Fiber Glass Pen: amzn.to/2AQfpzi **
UV-Lamp: amzn.to/3iuOSJ8 **
UV-Glue: amzn.to/3ghGSZK **
Rodico: amzn.to/3eWtTN2 **
Multi-Purpose Watch-Repair-Kit: amzn.to/2XIQ7Mn **
Multitool: amzn.to/2BNryW9 **
Buffing Wheels for Multitool: amzn.to/30gJCSF **
My Camera: amzn.to/32er4BJ **

** Affiliate Links
Disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This help support the channel and allows me to continue to make videos like this. Thank you for the support!

From sinks to walls, painting and glass, ingenious workers from all over the world show us their creative talent.

We hope you enjoy this review of Ingenious Workers!

See below for a full list of acknowledgment:

BAN BEKAS