I purchased this 1940s Marx Seversky P-35 Toy Fighter Plane on eBay November of 2020. It was missing the propeller and prop mount up front, the paint was basically gone and rusted away. The rear wheel had been replaced with a really poor rubber wheel. Overall this was a perfect restoration candidate. I made many new parts and nickel plated most of them. The propeller mount I made out of a tube and capped it then powder coated it. My sand blaster clogged up a little bit during filming and I had to take it all apart to clean it out. Thanks again for watching!
In this video im restoring an old broken and rusty Padlock.
This Padlock was sent to me by one of my subsrcibers from Italy. Right when I saw the picture I knew I want to restore this lock and I was impatiently waiting for the package to arrive. I found out that his padlock was made in Germany by Kamp in the 1930s. The lock was very rusty, the key was missing and it seemed to be broken. It was also very rusty inside, all moving parts were stuck and the closing mechanism was broken. Due to the amount of damage on the case due to rust I decided to paint it. This way I can use filler to achieve a nice finish, otherwise Id had to sand all pitting off and there was just not enough material left to do so. The plates from the mechanism were damaged a lot too, but they were all still functional. So I only removed all sharp edges and gave them a nice bluing finish for rust protection. The aluminium part, where the key comes in was damaged a lot too and had a lot of play in the case. If I would sand it clean it would get even more play. For those reasons I decided to make a new one, I choose bronze because it would fit better to the overall look at the end. Making the key was quite a challenge, but it turned out very well and it actually worked. In my opinion the padlock turned out very well and Im very happy with the endresult.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Daniele Castoldi
Tyler Nelson
Afreeflyingsoul
Gregory
Ricardo David
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Dre Gilley
Ethan Hartley
Hunter R.
JD Smith
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Shawn Daniels
Trevor Kam
TRG Restoration
Vince Valenti
Yale Baker
Zachary Grimes
Timestamps:
00:00 preview
00:39 disassembling
02:09 showing all the parts
02:22 cleaning the parts with the parts washer
02:50 sandblasting
03:29 restoring the case
06:18 restoring the shackle
07:38 making two brass parts to support the shackle sideways
08:17 restoring the plates
08:58 remaking the broken part
10:09 making a new spring
10:53 making new pins on the lathe
11:37 making three rings for the blind rivets
12:08 making a new front cover
13:34 making a new part for the key on the lathe and mill
15:19 making a new key
18:12 showing the parts before reassembling
18:31 reassembling
20:25 showing the finished restoration
21:05 final test
Time and costs of this restoration:
I was working on this project for 2 week
$10 steel for the frontplate and closing mechanism
$10 steel for the pins and key
$50 paint
$25 rivets
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
bit.ly/2IELGgB — оцени обновления Warface и забирай подарки!
Хотели видео, где я показываю процесс? Получайте злополучный нож и теплоходного клапана, режиссерская версия. До и после! Почему злополучный? — Ну, изначально я планировал сделать нож для бушкрафта, чтобы рубать им в лесу всякие дерева, но, как вы могли бы догадаться из названия, всё пошло не совсем по плану. Какие трудности можно испытать, если ты хочешь сделать нож, но ковка — это не совсем твой профиль? Как заточить свой самодельный нож? Как происходит закалка стали, если ты не кузнец? Давайте уже просто смотреть что получилось!
Build Not Bombs – это уникальный DIY-контент из России, где его создатель Даня Крастер совмещает познавательный контент с крутым шоу. Тут и эксперименты, и diy-гайды, реставрации и разрушения, физика и химия, интересные факты, обзоры на инструменты и мастер-классы от уважаемых людей. Основной целью видео является популяризация культуры DIY и прививание людей к ручному труду. Сделай сам или умри!
A look behind the curtain of one of our Hatari rifle builds in .275 Rigby (7x57). Threading and chambering the barrel, milling the extractor cut, the making of custom express sights, milling the Talley scope bases into the integral square bridges, inletting and shaping the Turkish walnut stock, fitting the skeleton grip cap and butt plate, installing the sling swivel, finishing the stock with a hand rubbed oil finish, checkering the the grip cap, butt, forend, and grip as well as the mullered border, rust bluing the metal work, checkering the bolt stop, and jeweling the bolt.
Instagram: @mnrcustom www.mnrcustom.com
Music by bensound.com
В этом ролике делаю полезную самоделку для своей мастерской.Она будет полезна и на кухне, и в гараже, и в доме.Покажу как сделать классную вещь практически из мусора и баночек от детского питания.
СКИДКА 10% по промокоду( EEWdBEqU) на любой продукт Мартьянов(масло, воск, лазурь и тд.) по ссылке td-martyanov.ru/?r_rid=EEWdBEqU
В своих видео я делаю самоделки своими руками в домашних условиях, а также полезные приспособления, и удивительные устройства которые облегчат вам жизнь и сделают ее немного комфортнее.Сделайте и себе самодельный инструмент с которым будет просто работать в гараже, мастерской или на даче.Пользуйтесь лайфхаками, полезными советами и хитростями.Приятного просмотра!
Если вам понравилось или не понравилось видео прежде чем делать вывод о канале посмотрите мои работы и возможно ваше мнение поменяется.Вот тут я оставлю ссылки на мои лучшие работы(по моему мнению) www.youtube.com/watch?v=dvjITJcMdyQ
Пластиковая бутылка, что из нее можно сделать своими руками в домашних условиях? Посмотрев это видео вы больше никогда не выбросите пластиковую бутылку.Возможно вы даже начнете их собирать.Всем приятного просмотра).
Если вам понравилось или не понравилось видео прежде чем делать вывод о канале посмотрите мои работы и возможно ваше мнение поменяется.Вот тут я оставлю ссылки на мои лучшие работы(по моему мнению) www.youtube.com/watch?v=dvjITJcMdyQ