Полный тест-драйв обновленного Ленд Крузера от команды InfoCar.ua. Несмотря на то, что это не новое поколение Toyota Land Cruiser, а всего лишь рестайлинг Land Cruiser 200, мы решили подробно разобраться, что нового в машине и даже сравнили ее на бездорожье с Toyota Land Cruiser 105 GX. Расход топлива, управляемость, комфорт и дизайн интерьера Тойота Ленд Крузер 200.
In this video im restoring an antique dented oiler.
My friend found this oiler in the steel waste at the recycling station. I really liked the unique design of it and I bought it from him for $5. It almost had no rust, but it was very dirty and had a lot of dents. The tricky part of this restoration was definitely the removing of all the dents in the can. I want to say thank you to my friend who helped me with this and to his boss, who allowed him to use the tools from his work place. Check out his website (www.huegli.swiss), they do car body repair in Zurich Switzerland. Im very happy how it turned out and I really like the new look of the oiler. Ill keep this oiler in my shop and Im going to use it from now on.
I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:
Paulina Zamora
Stephan Becker
sunniva thingstad
SA Graver
Joel Miller
Joan Casanovas
afreeflyingsoul
acemaclace
Allan Mckenzie
Clément BERNARD
Dawson Mertz
Jake
Julie Smith
Lucy Lole
Pascal Bertossa
Sheepless
Ian Hutchinson
Harrison Hughes
Joel Margolis
Llewellyn Schubert
Mark Anderson
Moeparker
Sasan Hezarkhani
Thibaut Hiegel
XxJonathXx
Brian Boots
Wambaquamba
Timestamps:
00:00 preview
00:22 disassembling
01:11 showing all the parts
01:27 cleaning the parts with the parts washer
01:59 cleaning the parts with warm water and Cif
02:21 showing the three new appeared parts
02:28 removing the paint with paint stripper
02:42 removing the rust on the inside with MC-51
03:00 removing the rust on the inside with small grinding stones
03:39 removing all the dents
04:47 using filler for the welding marks
05:02 cleaning up the rest of the can
06:02 restoring the cover
06:20 masking the parts before painting
06:48 applying two component primer
06:58 wet sanding with water
07:12 applying two component green coat (RAL 6005 moss green)
07:29 restoring the tube
08:35 restoring the pump shaft
09:17 restoring the spring
09:35 making a new cork gasket
09:52 making a new felt gasket
10:05 replacing the o-ring
10:10 showing all the parts before reassembling
10:23 reassembling
11:11 showing the finished product
11:40 final testing
Time and costs of this restoration:
I was working on this project for around 20h
$5 oiler
$20 primer (2K)
$20 moss green coat (2K)
$2.5 felt gasket
$0.5 o-ring
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Лампа — сверло из эпоксидной смолы. Изготовил эпоксидную лампу с RGB-подсветкой. Сделал прозрачное сверло своими руками из эпоксидной смолы: youtu.be/aOCoiuRj1s8
Адресные светодиодные кольца: ali.pub/3bbckz
Адресная светодиодная лента: ali.pub/4now27
Arduino Nano: ali.pub/3bbcre
Кнопка с подсветкой: ali.pub/3bbcy0
Электронная почта — pevcev83@mail.ru
Представляю вашему вниманию светильник из эпоксидной смолы на базе Arduino и адресных светодиодах WS2812. Epoxy L.E.D. Lamp. Светильник получился очень необычный, эпоксидная смола дала возможность сделать его полностью прозрачным, а адресные светодиоды WS2811 дают просто волшебный эффект, причем Arduino дает возможность менять режимы и загружать другие световые эффекты, которых просто огромное количество. DIY transparent drill Made of Epoxy Resin. Made of epoxy resin. Epoxy Resin.
Night epoxy lamp. Epoxy L.E.D. Lamp.
In this video I demonstrate the process of saving three walnut logs from the possibility of becoming firewood.
I received these freshly cut logs from my father-in-law as firewood for the fireplace, but then decided to give them another purpose.
It was a long process of transformation, but the result is worth the effort and a new experience for me, as Ive never worked with walnut boards before. Its a soft tree with an interesting color structure.
Later on I gifted this walnut cabinet to my parents.
Thank you all for watching!
Видео для начинающих. Я показываю, как делаю из кедрового бруска резную ложку, которую не стыдно и подарить.
Многие спрашивают и просят показать что-то попроще, думаю, что проще ложки нет ничего))).
Поддержать канал и мастерскую можно тут: money.yandex.ru/to/41001881182083
В этом видео я показываю, как на токарном станке выточить простой навесной замок, а также размещаю чертежи этого замка.
На развитие канала:
Номер карты Сбербанк: 2202 2025 0318 3612
Номер карты Газпромбанк: 4249 1701 7106 7329
ЮMoney (Яндекс.Деньги): yoomoney.ru/to/410011184449247
Текстовый файл с реквизитами для перевода: yadi.sk/d/6QSY78WjS1q1tw
For channel development:
in USD WebMoney: Z608916834262
in euro WebMoney: E184977459217