Алмазы считаются очень дорогими драгоценными камнями, а бриллианты — символом статуса и престижа. Но что если- это лишь надувательство в которое мы так долго верили?
ПОДПИСЫВАЙТЕСЬ на познавательный канал Удивительные факты
This time I´m restoring an old military watch from the WW2-Era.
It´s a Sanford with an AS 1123 movement.
The watch is in a really bad condition. The chrome-plating of the case is heavy damaged, the glass is scratched the movement is full of dirt and stops repeatedly.
I need to grind off the old chrome. After sanding and polishing the case, it´s ready for a new chrome-plating. But i need to add a layer of nickel before. The glass will be polished and the movement cleaned. Unfortunately the old radium-compound on the hands fell off so i need to re-lume the hands with super-luminova. I will add some coffee to it to make it more «vintage-looking».
After everything is cleaned, polished and re-plated, I can re-assemble the movement with some fresh oil. After that, this watch is in a good beat ( 6 seconds per day) again.
I hope you liked this restoration, if so, like, comment and subscribe ;)
** Affiliate Links
Disclaimer: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This help support the channel and allows me to continue to make videos like this. Thank you for the support!
A short film sharing what I’ve learnt about low current density anodising of aluminium from my limited experience in the home workshop. This isnt meant to be the right way, or even a good way, its just the way I do it.
The technique provides a measure of improved durability / corrosion resistance to parts, as well as changing the aesthetic.
I didn’t mention that the chemical baths can be reused over and over, so no need to remix for every job.
Useful links and further reading:
================
Changes to the rules surrounding the supply and possession of sulphuric acid in the UK during 2018:
For those speculating about the reason for the withdrawal of concentrated sulphuric acid products from general sale in the UK, this article might give food for thought:
A 15% acid solution seems to be what many people aim for. There’s pros and cons to higher and lower concentrations but they’re beyond the scope of my little setup. finish.com has a wealth of information:
The one featured is by by ‘kreutz’, mainly as I can use metric sizes with it. 1 mil is an optimistic coating thickness for sulphuric anodising -thicker coatings require hard anodising which is beyond the scope of this film.
Ive read them all, but I’ve not the time to respond individually. There’s some interesting ideas I can play with next time I get the anodising stuff out.
Some (mainly US) viewers seem annoyed that the UK government would take steps to try to ensure the safety of their citizens by making it more difficult to obtain something that (a small minority of) the general public has demonstrated theyre too stupid to have free access to. It’s a minor inconvenience to me, and good reason to re-visit bisulphate method. I dare say the persistent shopper will still be able to obtain it, but I wanted viewers to be aware of which side of the law both buyer and seller will be on if the relevant paperwork is not available. Perhaps there’s a market for selling pre-diluted 14.9% H2SO4 to the home anodiser?
As for the availability of lead, I should probably have said “small quantities of clean lead sheet are surprisingly hard to get hold of”. Larger fishing weights are still made from lead, as are old tyre weights (new ones are other metals) and these could be fashioned into sheets if I had the inclination. Lead flashing is available at every DIY store, but I can’t justify the cost of a 3 metre roll for the sake of a couple of small pieces. Ive since obtained some from a friendly roofer ;-)
I’m not a chemist, but I believe having too little acid to mix to the original calculation left me with a solution of around 14.5%. Given my uncalibrated scales and general ball park approach, I didn’t think it was worth the re-calculation / re-weighing / re-filming for a couple of percent difference. With concentration, time, temperature, current density and material all playing a part (and being beyond the scope of my simple setup) I just wanted to get on with it. Note: You can’t just divide the weight of acid by the weight of water to get a percentage, it needs to be the weight of acid by the weight of solution (i.e. acid plus water).
================
Created with subtitles (click the CC box) for the hard of hearing, or when you need to keep the volume low.