In this video im restoring an antique dented oiler.
My friend found this oiler in the steel waste at the recycling station. I really liked the unique design of it and I bought it from him for $5. It almost had no rust, but it was very dirty and had a lot of dents. The tricky part of this restoration was definitely the removing of all the dents in the can. I want to say thank you to my friend who helped me with this and to his boss, who allowed him to use the tools from his work place. Check out his website (www.huegli.swiss), they do car body repair in Zurich Switzerland. Im very happy how it turned out and I really like the new look of the oiler. Ill keep this oiler in my shop and Im going to use it from now on.
I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:
Paulina Zamora
Stephan Becker
sunniva thingstad
SA Graver
Joel Miller
Joan Casanovas
afreeflyingsoul
acemaclace
Allan Mckenzie
Clément BERNARD
Dawson Mertz
Jake
Julie Smith
Lucy Lole
Pascal Bertossa
Sheepless
Ian Hutchinson
Harrison Hughes
Joel Margolis
Llewellyn Schubert
Mark Anderson
Moeparker
Sasan Hezarkhani
Thibaut Hiegel
XxJonathXx
Brian Boots
Wambaquamba
Timestamps:
00:00 preview
00:22 disassembling
01:11 showing all the parts
01:27 cleaning the parts with the parts washer
01:59 cleaning the parts with warm water and Cif
02:21 showing the three new appeared parts
02:28 removing the paint with paint stripper
02:42 removing the rust on the inside with MC-51
03:00 removing the rust on the inside with small grinding stones
03:39 removing all the dents
04:47 using filler for the welding marks
05:02 cleaning up the rest of the can
06:02 restoring the cover
06:20 masking the parts before painting
06:48 applying two component primer
06:58 wet sanding with water
07:12 applying two component green coat (RAL 6005 moss green)
07:29 restoring the tube
08:35 restoring the pump shaft
09:17 restoring the spring
09:35 making a new cork gasket
09:52 making a new felt gasket
10:05 replacing the o-ring
10:10 showing all the parts before reassembling
10:23 reassembling
11:11 showing the finished product
11:40 final testing
Time and costs of this restoration:
I was working on this project for around 20h
$5 oiler
$20 primer (2K)
$20 moss green coat (2K)
$2.5 felt gasket
$0.5 o-ring
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Пластиковая бутылка, что из нее можно сделать своими руками в домашних условиях? Посмотрев это видео вы больше никогда не выбросите пластиковую бутылку.Возможно вы даже начнете их собирать.Всем приятного просмотра).
Если вам понравилось или не понравилось видео прежде чем делать вывод о канале посмотрите мои работы и возможно ваше мнение поменяется.Вот тут я оставлю ссылки на мои лучшие работы(по моему мнению) www.youtube.com/watch?v=dvjITJcMdyQ
БУРЖУЙКА из АВТОмобильных Колёсных Дисков для отопления гаража, дачи, огорода, автосервиса.
POTBELLY STOVE from AUTO Car Wheels for heating a garage, summer house, garden, car service.
Здорово смотреть такие ролики подписавшись на канал и узнавать о них как только они выходят!
Its great to watch such videos by subscribing to the channel and find out about them as soon as they go out!
В данном видео можно увидеть процесс изготовления необычной в какой то степени фантастичной буржуйка из автомобильных колёсных дисков с внедрением в саму конструкцию данной печи определённых систем для увеличения КПД печки а так же более экономичного использования Дров.
Такую конструкцию печки сможет сделать каждый своими руками имея под рукой болгарку (флекс), сварочный аппарат, автомобильные диски, и всего лишь немного металла.
Данная конструкция печи из колёсных дисков получилась очень эффективной и показала себя с лучшей стороны. Эконом Буржуйка с форсункой вполне способна отопить ваше помещение площадью даже 50 квадратных метров — это как ни как не большой автосервис.
Эта Буржуйка из дисков подойдёт и для тех кто хочет с экономить на её приобретении. Желание и немного время на её изготовление избавит вас от растрат на покупку печи или котла отопительного. Это намного дешевле чем покупать тот же булерьян в магазине. Прежде чем сдавать металлолом стоит подумать а что можно из него изготовить полезного для своих собственных нужд. Так же кривые не полноценные автомобильные колёсные диски из металла можно применить в построении самодельной буржуйки и многого другого.
Самодельные вещи служат намного дольше чем покупные так как в процессе изготовления вы имеете возможность в момент сборки конструкции в данном случаи печь из автомобильных дисков, проектировать и дополнять вашу задумку и конструкцию в ходе сборке. В целом все зависит от вашего энтузиазма и не ограниченной фантазии.
Так же вы получаете без ценный опыт который пригодиться вам в вашей собственной жизни.
У эконом буржуйки с форсункой из автомобильных колесных дисков получилась превосходная тепло отдача по сравнению с многими другими. Она способна за короткий промежуток времени отопить и нагреть ваше помещение, мастерскую, гараж и так далее. Где гораздо приятнее будет находиться вам в комфортной для вас среде при оптимально тёплой температуре воздуха внутри помещения.
Эконом Буржуйка с Форсункой практически мгновенно нагревает гараж стандартных размеров 6 на 3 метра площадью 18 квадратных метров.
Через 30 минут на полной тяге внутри гаража становиться дико жарко.
Желаю вам приятного просмотра данного видео об изготовлении особенной буржуйки из простых металлических предметов.
Удачи вам во всех ваших начинаниях и самодельных самоделок. Успехов!
Внимание конкурс для всех желающих. Для участия в нем нужно посмотреть видео а что бы получить приз просто подписаться на канал. Подробная информация внутри видео. Видео о изготовлении Буржуйки в гараже.
ENGLISH
In this video you can see the process of manufacturing an unusual to some extent fantastic potbelly stove from automobile rims with the introduction of certain systems in the very design of this furnace to increase the efficiency of the stove as well as the more economical use of Firewood.
This design of the stove can be done by everyone with their own hands, having at hand a grinder (flex), a welding machine, car wheels, and just a little metal.
This design of the furnace made of rims turned out to be very effective and showed its best. House-keeper A potbelly stove with a nozzle is quite capable of heating your premises with an area of even 50 square meters — this is no matter how big a car service is.
This potbelly stove from the disks is suitable for those who want to save on its purchase. The desire and a little time for its manufacture will save you from the waste of buying a stove or heating boiler. It is much cheaper than buying the same buleryan in the store. Before you take the scrap metal, you should think about what you can make of it useful for your own needs. Also, curves that are not full-fledged metal automobile rims can be used in the construction of a home-made potbelly stove and much more.
Home-made things last much longer than purchased ones, since during the manufacturing process you have the opportunity, at the time of assembly of the structure in this case, to bake from car wheels, to design and supplement your idea and design during assembly. In general, it all depends on your enthusiasm and unlimited imagination.
Also, you get without valuable experience that is useful to you in your own life.
Good luck in all your undertakings and home-made home-made products. Good luck!
Attention competition for all comers. To participate in it you need to watch the video and to get a prize just subscribe to the channel. Details inside the video. Video on the manufacture of potbelly stoves in the garage.
Господа!
В этой заключительной серии проекта по LADA Vesta SW CROSS 2020, мы подведем итоги и покажем вам как мы доработали наш автомобиль для нового владельца.
Подумай о зимних шинах заранее, переходи по ссылке bit.ly/3dckpx3
До 31 декабря действует акция «Шиномонтаж в подарок».
Сделай поездки намного комфортнее и безопаснее с шинами Michelin!
— Всем привет, меня зовут Елена Лисовская и я автор проекта «Лиса рулит». Вся моя жизнь связана с авто. В своем блоге я делюсь знаниями о тачках, делаю интересные проекты, а также разоблачаю жуликов и перекупов. Подписывайтесь — не пожалеете! И не забудьте про колокольчик)
Тест пикапов, каким он должен быть: Mitsubishi L200 или Isuzu D-MAX? Что взять и почему? Отвечаем на ВАЖНЕЙШИЕ вопросы!
Сделать багажник с электроприводом clck.ru/GLXd6
Узнать подробней о D-MAX: u.to/gOdWFQ
Узнать подробней о L200: clck.ru/GLXEJ