Американцы — те еще автолюбители. Прожорливые, рамные монстры — самые их любимые авто. Едем на автошоу в Чикаго, чтобы посмотреть, на каких авто ездит настоящая Америка. А не отдельно взятый штат, вроде Калифорнии) Тем более Чикаго еще не отошел от морозов под -40 и многие отмороженные посетители оформляют покупки прямо на автошоу!
Привет Друзья! В этом ролике хочу показать классную идею как из обычного металлолома сделать уникальный инструмент! Я остался очень доволен данной самоделкой.Результат превзошел мои ожидания! Всем приятного просмотра!
Audi готовятся выпустить свой первый электромобиль RS… и Мэту удалось заполучить его прототип! Представляем Audi RS e-tron GT!
Характеристики этой машины совершенно сумасшедшие… У неё два электромотора, которые вместе выдают 600 л.с., а ещё есть режим overboost, позволяющий получить 650 л.с. на две секунды после старта! Кроме того, 850 Нм момента, а разгон до 100 км/ч быстрее 3,5 секунд.
Кроме того, у электромобиля батарея 93 кВт-ч и заявленная дальность хода в 402 км. Что касается цены, обычный e-tron GT обойдётся в 100 тысяч фунтов, а модель RS в целых 130 тысяч! Так стоит ли этот электромобиль таких денег? Смотрите обзор Мэта, чтобы узнать!
Япония — Как выглядят дома и парковки в частном секторе города Иокогама?
Как выкидывают мусор? Как паркуют автомобили? И многое другое в новом выпуске о жизни в Японии.
**********
Станьте спонсором канала и получите возможность смотреть видео первым, смотреть стримы в записи и задавать вопросы и получить доступ к экслюзивному контенту. www.youtube.com/channel/UC1AhzkpXFX6_kAc7niTcc3w/join
**********
Влог о Японии — Все что вы хотели знать о жизни в Японии
Тайные ядерные хранилища, марсианская цивилизация, невероятные способности подземных животных, катакомбы под Эйфелевой башней и тоннели под Кремлём, гул земли из Кольской впадины, подземные океаны, невероятные находки, подземные города, самые грандиозные подкопы для беглецов из тюрем.
Адриано Челентано – знаменитый итальянский певец и актер, пользовавшийся особой популярностью у советских зрителей и не растерявший шарм и востребованность на протяжении долгой карьеры. Он является одним из самых успешных итальянских исполнителей в истории. При этом Челентано добился успеха и признания практически в равной мере как актер и певец. Созданный им образ обаятельного рубахи-парня и сейчас покоряет сердца зрителей. Это видео мы сделали по просьбам наших подписчиков.
#челентано #celentano
In this video im restoring an antique ox-tongue iron.
The ox-tongue iron is named for the particular shape of the insert. It was used in the late 19th century.
I bought this one on eBay for $25. The condition of this item was not too bad in terms of rust. Unfortunately the ox-tongue insert was missing. The handle had play because one nut of the two bolts was missing. During the dissasembling I realized that it had asbestos as termal isolation, I replaced it with parts made out of duroplastic. Duroplastic does not melt, its heat resistant up to around 300°C. As the holes of the handle were not centered, I decided to drill them up and close them with glued in pins. One of the two bolts of the handle was bent, one nut and washer was missing and the used washer was too big. Thats why I decided to make it all new. The door didnt fit at all, so I welded up the holes, and made new ones until the door sit flush with the top of the iron. After that I was able to make the outer contur fit. I choose to turn a few parts black. After the first sandblasting I removed all the scratches and pitting with sanding and then I sandblasted them again to achieve a very nice and even surface finish. The bluing then makes a very nice matte shiny look. I decided to polish the body, but I used bluing on the inside for rust protection.
Overall I really like the look from this iron, how the colors of the wood, the black steel and the polished steel play with eachother.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Afreeflyingsoul
Gregory
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
David Barker
Dre Gilley
Ethan Hartley
Hunter R.
JD Smith
Jonas Richartz
Kelly Imgrund
LVE
Martin Rønnow Klarlund
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Trevor Kam
TRG Restoration
Vince Valenti
Yale Baker
Timestamps:
00:00 preview
00:32 disassembling
01:41 showing all the parts
01:59 sandblasting
02:52 restoring the body
04:27 restoring the hinge
06:07 restoring the bolts
06:47 restoring the door
09:28 restoring the wooden handle
11:43 making new bolts, nuts and washers on the lathe
13:49 restoring the holder for the handle
14:24 restoring the reflector plate
15:10 showing the new parts out of duroplastic
15:17 making a new ox-tongue insert
17:22 making a new handle to hold the ox-tongue insert
20:51 showing the parts before reassembling
21:06 reassembling
22:34showing the finished restoration
23:36 final test
Time and costs of this restoration:
I was working on this project for 3 week
$25 ox-tongue iron
$2 wooden pins for the handle
$15 material for the ox-tongue and handle
$40 reverse countersink hand tool
$10 wax for wood
$20 angle screwdrivers
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
In this video im restoring an old broken and rusty Padlock.
This Padlock was sent to me by one of my subsrcibers from Italy. Right when I saw the picture I knew I want to restore this lock and I was impatiently waiting for the package to arrive. I found out that his padlock was made in Germany by Kamp in the 1930s. The lock was very rusty, the key was missing and it seemed to be broken. It was also very rusty inside, all moving parts were stuck and the closing mechanism was broken. Due to the amount of damage on the case due to rust I decided to paint it. This way I can use filler to achieve a nice finish, otherwise Id had to sand all pitting off and there was just not enough material left to do so. The plates from the mechanism were damaged a lot too, but they were all still functional. So I only removed all sharp edges and gave them a nice bluing finish for rust protection. The aluminium part, where the key comes in was damaged a lot too and had a lot of play in the case. If I would sand it clean it would get even more play. For those reasons I decided to make a new one, I choose bronze because it would fit better to the overall look at the end. Making the key was quite a challenge, but it turned out very well and it actually worked. In my opinion the padlock turned out very well and Im very happy with the endresult.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Daniele Castoldi
Tyler Nelson
Afreeflyingsoul
Gregory
Ricardo David
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Dre Gilley
Ethan Hartley
Hunter R.
JD Smith
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Shawn Daniels
Trevor Kam
TRG Restoration
Vince Valenti
Yale Baker
Zachary Grimes
Timestamps:
00:00 preview
00:39 disassembling
02:09 showing all the parts
02:22 cleaning the parts with the parts washer
02:50 sandblasting
03:29 restoring the case
06:18 restoring the shackle
07:38 making two brass parts to support the shackle sideways
08:17 restoring the plates
08:58 remaking the broken part
10:09 making a new spring
10:53 making new pins on the lathe
11:37 making three rings for the blind rivets
12:08 making a new front cover
13:34 making a new part for the key on the lathe and mill
15:19 making a new key
18:12 showing the parts before reassembling
18:31 reassembling
20:25 showing the finished restoration
21:05 final test
Time and costs of this restoration:
I was working on this project for 2 week
$10 steel for the frontplate and closing mechanism
$10 steel for the pins and key
$50 paint
$25 rivets
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.