Япония — Как выглядят дома и парковки в частном секторе города Иокогама?
Как выкидывают мусор? Как паркуют автомобили? И многое другое в новом выпуске о жизни в Японии.
**********
Станьте спонсором канала и получите возможность смотреть видео первым, смотреть стримы в записи и задавать вопросы и получить доступ к экслюзивному контенту. www.youtube.com/channel/UC1AhzkpXFX6_kAc7niTcc3w/join
**********
Влог о Японии — Все что вы хотели знать о жизни в Японии
Адриано Челентано – знаменитый итальянский певец и актер, пользовавшийся особой популярностью у советских зрителей и не растерявший шарм и востребованность на протяжении долгой карьеры. Он является одним из самых успешных итальянских исполнителей в истории. При этом Челентано добился успеха и признания практически в равной мере как актер и певец. Созданный им образ обаятельного рубахи-парня и сейчас покоряет сердца зрителей. Это видео мы сделали по просьбам наших подписчиков.
#челентано #celentano
Зачем КАМАЗ сделал супертяжелые самосвалы, чем они отличаются от обычных КАМАЗов и как мы умудрились разбить одному из них бампер? Камский автозавод завершил испытания и весной 2017 года запускает в серию тяжелые самосвалы и шасси КАМАЗ-6580, КАМАЗ-65801 и КАМАЗ-65802. Полная масса КАМАЗ-6580 и КАМАЗ-65801 – 41 тонна, а КАМАЗ-65801 – 50 тонн! Таких самосвалов у КАМАЗа еще не было!
It was around three months ago when I visited my friend that works at the steel waste. He made an amazing found. He found multible items that were in a very rough condition. They almost had some kind of concrete on them and a lot of heavy rust. This little screwdriver got my attention right away. It was not clearly visible what the function of it was, but I remember that I thought it might be some kind of ratchet mechanism. At home I posted a few pics of it in my Instagram story. It didnt took long for @hand tool rescue to reply, as he has the same screwdriver, just a slightly modern version of it, but similar mechanism. After some research I found some more pics and videos online. The brand is „Weltrekord“ made in Germany and its called „Hebelschraubenzieher“ which meas „lever scredriver“. The model I found was the first ever designed one from 1891. Weltrekord later made some small changes on the design. Newer ones have a small collet to clamp the insert bits and even newer ones came with plastic handles instead of wood.
At first I thought this will be a quick straight forward restoration project. It turned out to be a very tricky one. The most difficult part was definitely the disassembly, it took me three full days to get it in pieces. Heavy rust has done so much damage to all of the parts. Unfortunately the handle cracked when I removed it. I tried to restore it, but it became a huge mess and I decided to make a new one to have a nice and clean look. Theres a 40 minutes version of this video on my Patreon page where I show how I tried to repair the handle. I had to weld up material on a lot of parts and machined and sanded it clean afterwards. That all worked perfectly fine. Some parts have still very slight pitting but overall it turned out very well. For the finish on the steel parts I decided to try nickel plating for the first time and it worked fantastic. I went with a brushed finish and with the nickel coat the parts turned out amazing. I really like the look of the nickel plated parts with the wooden handle.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Adel AlSaffar
Gregory
Alex McGeorge
Courtney Maleport
David Barker
Greg Marston
Mellissa Marcus
Muzaffer Aksoy
Paul Mampilly
Vickie Bligh
Vince Valenti
Xavier Carbel
Yale Baker
Alex Breton
alex latzko
Alex Shipley
Aljoscha Erlebach
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brian Newton
Carlo
Chad Bryant
Chris Simondet
Cristian Zorrilla
Dre Gilley
Grok Senften
Harper Kim
Hunter R.
Jeremy Cole
Jessica Alexander
Jonas Richartz
Jordan Page
Joshua Bentley
Jozette Soto
justin f.
Kelly Imgrund
LVE
Marc Cerisier
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Paul Ambry
PerryK
Scott Marshall
Stuart Mitchell
Suiros
The Carlsons
Trevor Kam
Warren G Strand Jr
웅록 윤
Time and costs of this restoration:
$5 wood for the handle
$3 spring steel wire
$10 vinegar for nickel solution
I was working on this project for 2 weeks
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
In this video im restoring an old broken and rusty Padlock.
This Padlock was sent to me by one of my subsrcibers from Italy. Right when I saw the picture I knew I want to restore this lock and I was impatiently waiting for the package to arrive. I found out that his padlock was made in Germany by Kamp in the 1930s. The lock was very rusty, the key was missing and it seemed to be broken. It was also very rusty inside, all moving parts were stuck and the closing mechanism was broken. Due to the amount of damage on the case due to rust I decided to paint it. This way I can use filler to achieve a nice finish, otherwise Id had to sand all pitting off and there was just not enough material left to do so. The plates from the mechanism were damaged a lot too, but they were all still functional. So I only removed all sharp edges and gave them a nice bluing finish for rust protection. The aluminium part, where the key comes in was damaged a lot too and had a lot of play in the case. If I would sand it clean it would get even more play. For those reasons I decided to make a new one, I choose bronze because it would fit better to the overall look at the end. Making the key was quite a challenge, but it turned out very well and it actually worked. In my opinion the padlock turned out very well and Im very happy with the endresult.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Daniele Castoldi
Tyler Nelson
Afreeflyingsoul
Gregory
Ricardo David
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Dre Gilley
Ethan Hartley
Hunter R.
JD Smith
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Shawn Daniels
Trevor Kam
TRG Restoration
Vince Valenti
Yale Baker
Zachary Grimes
Timestamps:
00:00 preview
00:39 disassembling
02:09 showing all the parts
02:22 cleaning the parts with the parts washer
02:50 sandblasting
03:29 restoring the case
06:18 restoring the shackle
07:38 making two brass parts to support the shackle sideways
08:17 restoring the plates
08:58 remaking the broken part
10:09 making a new spring
10:53 making new pins on the lathe
11:37 making three rings for the blind rivets
12:08 making a new front cover
13:34 making a new part for the key on the lathe and mill
15:19 making a new key
18:12 showing the parts before reassembling
18:31 reassembling
20:25 showing the finished restoration
21:05 final test
Time and costs of this restoration:
I was working on this project for 2 week
$10 steel for the frontplate and closing mechanism
$10 steel for the pins and key
$50 paint
$25 rivets
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Video: Incredible Video of A-10 Warthogs Fearsome GAU-8 Avenger in Action
The A-10 Thunderbolt is also known as the Warthog, the ‘flying gun’ and the Tankbuster.
The A-10 is a high-survivability and versatile aircraft, popular with pilots for the ‘get home’ effectiveness.
The mission of the aircraft is ground attack against tanks, armoured vehicles and installations, and close air support of ground forces.
The A-10 is suitable for operation from forward air bases, with short take-off and landing capability. The aircraft has a long range (800 miles), high endurance and can loiter in the battle area.
The manoeuvrability at low speed and low altitude (below 1,000ft) allows accurate and effective targeting and weapon delivery over all types of terrain.
The GAU-8/A 30mm Gatlin gun iis installed on the U.S. Air Force’s A-10 Thunderbolt II aircraft and the Navy’s Goalkeeper Close-In Weapon System. The GAU-8/A provides a reliable, high-rate-of-fire, combat-proven weapon for close air support and shipboard defense missions.
Each of the gun’s seven barrels contains its own breech bolt assembly, which fires once per gun revolution. This ensures long barrel life because firing loads are distributed over all seven barrels. Continuous rotary motion reduces impact loads on gun components, leading to long parts life and high reliability.
The A-10 aircraft is specifically designed to provide close air support. The GAU-8/A gun provides rapid response to threats that are in close proximity to friendly ground forces and is well suited for engagements inside missile envelopes.
In the Goalkeeper application, the GAU-8/A fires a lethal, high-kinetic-energy 30mm Missile-Piercing Discarding Sabot round.
Video by Airman 1st Class Christina Rios, Senior Airman Christina Rios, Tech. Sgt. William Hopper, Tech. Sgt. Eric E Flores
#usmilitarynews #americanpatriot #usmilitary
Upgrade your old vehicle by adding the right technology to help you on your travels. Whether it’s for the inside or the outside of your car, there are thousands of gizmo’s and gadgets to choose from nowadays. We thought we would compile a list of a few favourites from our search to share with you today!
Disclaimer: Quantum Tech HD is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
The other 2x72" belt grinder I made four years back has been the most used tool in my workshop ever since. So I decided to make a bigger one that can run belts up to 160" and features swappable arms for different wheels and attachments. The only parts I bought new for this build are the 12" contact wheel, pedal switch and concrete, all steel found at the scrap yard. Of course I also order custom sized belts (50x3500) in variuos grits, the 320grit one you see at the end I glued myself with ca and cloth and ended up breaking within the first 5min of use.
Design loosely inspired by «Bader Space Saver» grinder I have seen used by Matt and Ilya over @That Works. What looks like a great belt grinder that is still being sold here: www.stephenbader.com/product/bader-space-saver/
00:00 Base And Main Frame
03:11 Tensioning Arm
09:37 Tilt Adjustment
11:37 Tracking Mechanism
17:18 Contact Wheel Arm
20:53 Motor / Drive Wheel
22:11 Tests
Для ценителей творчества Михаила Булгакова, пожалуй, было довольно интересно посмотреть экранизацию книги «Собачье сердце», по сценарию Владимира Бортко. Уверен, эти люди прекрасно помнят, чем занимался профессор Преображенский, который смог создать гибрид бездомного пса Шарика и уголовника Клима Чугункина. Но вот мало кто знает, что у этого гения был реальный прототип, о котором сегодня и пойдет речь. «ОБЕЗЬЯНИЙ ДОКТОР» И ЕГО ЖУТКИЙ ЭКСПЕРИМЕНТ
По вопросам авторского права, пожалуйста, свяжитесь с нами по адресу: nskshow2017@yandex.ru
